Caller ID Ring No-Answer (RNA)
Description:
This feature offers telephone users the ability to review calls that ring at their stations while
they are away. The system stores caller ID RNA records and allows users to review them and
use one-button dialing to return those calls that need returning. The feature also denotes the
identification of the last station that reviewed the records thus helping prevent multiple call
backs to the same number. After users review the caller ID RNA records, the system deletes the
records from their telephones yet retains them in the SMDA storage so that they can look at
them later if they must. For complete caller ID programming, refer to Section
14.1.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select station and press ENTER.
3 . From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name for station
you wish to program and press ENTER.
5 . From station programming menu, type item number for feature and press ENTER.
6 . Press CONTROL E for edit table.
7. Type
a
to add or
r
to remove and press ENTER.
8 . Enter caller ID line port numbers l-240 (enter n, nn, nnn or n-nnn) to serve feature
at this station and press ENTER.
9 . Press ESCAPE three times.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
11. Repeat steps 4-9 for each station or press ESCAPE to end.
Ring No-Answer Rings
Description:
This procedure sets the amount of rings that sound at one station port before the call rolls over
to ring at another station port. Any system feature that requires a ring no-answer value (for
example, call forwarding) uses the setting that you program here.
The system defaults the ring no-answer value at regular station ports to four rings, and it
defaults ports programmed to function as voice mail ports to three rings. This insure that, at
default, the voice mail equipment will have sufficient time to answer a call before it rolls over
to the next port.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select station programming and press ENTER.
4. Type personal intercom number or previously assigned name
and press ENTER.
5. From station programming menu, type item number for feature and press ENTER.
6. Type number of rings O-6 and press ENTER.
7. When finished, press ESCAPE twice.
8. Type y to accept changes, n to reject them, or r to resume editing
and press ENTER.
9. Repeat steps 4-8 for each station or press ESCAPE to end.
Station Features
Programming 7-45
