3.3
Setting the Absorb Ring Time
Description:
Use this procedure to specify the amount of time the system waits while it generates caller ID
information before it generates system ringing.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select caller ID and press ENTER.
3. From caller ID menu, select options and press ENTER .
4. From the options menu, type item number for feature and press ENTER.
5. Press SPACE bar for time (0–8 seconds) and press ENTER.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
3.4
Deleting the Viewed RNA Record
Description:
When the system makes caller ID RNA information available to a group of stations, any station
user in the group can review the information by pressing the telephone’s CID button. When he
or she does this, the system removes the record from that telephone but continues to flash the
CID button status light for other stations in the group. If you enable this feature, the system
will remove the caller ID record from all telephones if any user in the group views a record.
Programming:
1. Press CONTROL T for main menu.
2. From main menu, select caller ID and press ENTER.
3. From caller ID menu, select options and press ENTER .
4. From the options menu, type item number for feature and press ENTER.
5. Press SPACE bar for feature setting and press ENTER.
6. When finished, press ESCAPE twice.
7. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
IMI89–205
Installing and Programming The Caller ID Device
Installing And Programming The Caller ID Device– 7