DXP Plus Programming Instructions
11.7
Exception Number Programming
Description:
Exception numbers allow stations to dial numbers that are not normally allowed by their
restriction levels. When a user dials a number at his or her station, the toll restriction feature
compares it to the toll restriction numbers, the toll groups, the restriction level, and to the
exception number. If it makes a match, the station is not normally allowed to dial the number.
However, if the exception number of the toll restriction table line entry matches one of the
exception numbers assigned to the station, the station is allowed to dial the number. The
exception number values that you can assign are 1 through 32 and NONE. You can assign 32
exception numbers to each station. You can assign one exception number to each toll restriction
table line entry. The feature provide you with separate line entries expressly for the purpose of
specifying special dialing exceptions.
Programming:
Assign exception number to toll restriction table line entry with this procedure.
1. Assign an exception number of 0 to 32 to each listed restriction number that may need it.
2 . Press CONTROL T for main menu.
3 . From main menu, select
and press ENTER.
4 . From toll restriction menu, select restriction tables and press ENTER.
5 . From the restriction table menu, type row number and press ENTER.
6 . Press TAB to position cursor to exception level column.
7. Type exception number O-32.
8 . Press ENTER and repeat step 7 for each line entry.
9 . When finished, press ESCAPE twice.
10. Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
Assign exception number to station with this procedure.
1.
2 .
3 .
4 .
5 .
Press CONTROL T for main menu.
From main menu, select stations and press ENTER.
From stations menu, select station programming and press ENTER.
Type intercom number or name of station.
From station programming menu, type item number for Day (or Night)
exception number.
6 . Type exception numbers O-32 (n,nn or n-nn) or type 0 for none.
7 . When finished, press ESCAPE twice.
8 . Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9 . Press ESCAPE to end.
Toll Restriction Programming
