DXP Plus Programming
Enabling Or Disabling
Lines
Description:
Programming
Use the following programming instructions to enable or disable DISA capability on lines 1
through 240. Also, use the DISA Voice Options 1 through 4 to select digital voice announce
(DVA) messages. For example, selecting DISA voice option 2 will cause welcome greeting 2,
day main menu 2, night main menu 2, recall no answer 2, and recall busy 2 prompts to play
whenever a DISA line is covered by DVA. Refer to
14.3 for complete DVA
programming details.
1 Press CONTROL T for main menu.
2 . From main menu, select lines and press ENTER.
3 . From the lines menu, select line programming and press
4 . Enter line number you want to program and press ENTER.
5 . From the line (number) programming menu (page
select DISA and press ENTER.
6 . Toggle the SPACE bar to select/deselect DISA and press ENTER.
7 . Enter 1 through 4 for the DISA Voice Options and press ESCAPE twice.
8 . Type y to accept changes, n to reject them, or r to resume editing and press ENTER.
9 . Enter the number for the next line you want to program or press ESCAPE to end.
8.8.3
Programming DISA Authorization Codes
Description:
DISA callers with assigned authorization codes have access to advanced system features.
Authorization codes are associated with either personal or group intercom numbers; therefore,
when a DISA caller enters his or her authorization code, the code alerts the system as to what
features to make available to the caller. Once callers access features with authorization codes,
the access remains in effect until any idle time exceeds the authorization code time-out period.
Use this programming procedure to assign or modify authorization codes and to tie the
authorization codes to
intercom numbers. Use the Section 8.8.4 procedure to
assign a station class of service to the intercom numbers.
Programming:
1. Press CONTROL T for main menu.
2 . From main menu, select
and press ENTER.
3 . From
menu, type item number for authorization codes and press ENTER.
4 . From authorization code menu, type line number to add, remove, or modify authorization
codes and press ENTER.
5 . Type authorization code (up to 6 digits) and press ENTER.
NOTE: You can include a programmed pause as part of the authorization code by typing a p
the point in the code where you wish a pause to occur.
If
you include a pause, a
user
must wait the programmed pause time at the proper point when he or she dials the
authorization code because the pause is now
of the code.
6 . If adding or modifying a code, type intercom number that it is associated
with and press ENTER.
7 . When finished, press ESCAPE once.
8 . Type item number to display authorization codes for review and press ENTER.
9 . When finished, press ESCAPE to end.
8-30 Line Features Programming
