InteliLite Global Guide
90
AUTO
The controller does not respond to buttons Start
, Stop
and GCB ON/OFF
.Engine start/stop request
is given by binary input
5.5.3 Engine start
Diesel engine
The setpoint
has to be switched to the Diesel position.
After the command for start is issued (pressing Start button in MAN mode, auto start condition is fulfilled in
AUTO mode or controller is switched to TEST mode), outputs
and
are energized for time period given by the setpoints
and
.
After
and
, the output
is energized and after
the starter of motor is activated by energizing the
output
When one or more of following conditions are met, the starter output is de-energized:
The engine speed exceeds the value of
, or
One of
Additional running engine indications (page 117)
signals becomes active.
The controller remains in the Starting phase until the engine speed exceeds the value of
, after that it is considered as started and the Idle period will follow.
The maximum duration that the output
is energized is determined by the setpoint
Maximum Cranking Time (page 190)
. If the engine does not start within this period, the output
is de-energized and a pause with length determined by
Cranking Fail Pause (page 190)
will
follow.
and
outputs are active during the pause. After the
pause has elapsed, the next start attempt is executed. The number of start attempts is given by the setpoint
Once the engine is started, the Idle period follows. The binary output
remains
inactive (as it was during the start). The idle period duration is adjusted by the setpoint
. When controller is in the MAN mode, it is possible to finish the
count down by
pushing the Start button.
After the idle period has finished, the output
is activated and the start-up
sequence is finished. The
phase follows.
Summary of Contents for InteliLite AMF25
