ComAp InteliLite AMF25 Global Manual Download Page 378

Page: 378 / 735

InteliLite Global Guide

378

Setpoint group

CM-Ethernet

Related FW

1.9.0

Range [units]

FIXED / AUTOMATIC [-]

Default value

AUTOMATIC

Alternative config

Step

[-]

Comm object

24259

Related applications

AMF, MRS

Config level

Standard

Setpoint visibility

Only if relevant module is installed

Description

The setpoint is used to select the method how the ethernet connection is adjusted.

DISABLED:

The Ethernet connection is fixed by means of the setpoints IP Addr, NetMask, GateIP,

DNS IP Address.

This method should be used for a classic Ethernet or internet connection. When this type

of connection opens, the controller is specified by its IP address. This means that it

would be inconvenient if the IP address were not fixed (static).

ENABLED:

The Ethernet connection setting is obtained

automatically from the DHCP server

. The

obtained settings are then copied to the related setpoints. If the process of obtaining the

settings from the DHCP server is not successful, the value

000.000.000.000

is copied to

the setpoint IP address and the module continues to try to obtain the settings.

IP Address Mode

back to List of setpoints

Setpoint group

CM-Ethernet

Related FW

1.9.0

Range [units]

Valid IP address [-]

Default value

192.168.1.254

Alternative config

Step

[-]

Comm object

24376

Related applications

AMF, MRS

Config level

Standard

Setpoint visibility

Only if relevant module is ins conditioned by the setpoint

IP Address Mode

(page 378)

Description

The setpoint is used to set the address when you are in static mode.

IP Address Mode (page 378)

is FIXED this setpoint is used to adjust the IP address of the ethernet

interface of the controller. Ask your IT specialist for help with this setting.

IP Address Mode (page 378)

is AUTOMATIC this setpoint is inactive. The IP address is assigned by the

DHCP server.

IP Address

back to List of setpoints

Summary of Contents for InteliLite AMF25
































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for InteliLite AMF25

Reviews:

Related manuals for InteliLite AMF25

Brands by name

Popular brands

ComAp InteliLite AMF25, Global Manual

Search results

Summary of Contents for InteliLite AMF25

Reviews:

Related manuals for InteliLite AMF25

Brands by name

Popular brands