ComAp InteliLite AMF25, Global Manual

Page: 6 / 735

InteliLite Global Guide
6
1 Document information
1.1 Clarification of notation 6
1.2 About this Global Guide 6
1.3 Legal notice 6
1.4 General warnings 8
1.5 Certifications and standards 9
1.6 Document history 9
1.7 Symbols in this manual 10
6
back to Table of contents
1.1 Clarification of notation
Note: This type of paragraph calls readers attention to a notice or related theme.
IMPORTANT: This type of paragraph highlights a procedure, adjustment etc., which can cause a
damage or unproper function of the equipment if not performed correctly and may not be clear at
first sight.
Example: This type of paragraph contains information that is used to illustrate how a specific function
works.
1.2 About this Global Guide
This manual contains important instructions for InteliLite controllers family that shall be followed during
installation and maintenance of the controllers.
This manual provides general information how to install and operate InteliLite controllers.
This manual is dedicated for:
Operators of gen-sets
Gen-set control panel builders
For everybody who is concerned with installation, operation and maintenance of the gen-set
1.3 Legal notice
This End User's Guide /Manual as part of the Documentation is an inseparable part of ComAp’s Product and
may be used exclusively according to the conditions defined in the “USER or Distributor LICENSE
AGREEMENT CONDITIONS– COMAP CONTROL SYSTEMS SOFTWARE” (License Agreement) and in the
“ComAp a.s. Standard Terms for sale of Products and provision of Services” (Standard Terms)
ComAp’s License Agreement is governed by the Czech Authorship Act 121/2000 Col., by international treaties
and by other relevant legal documents regulating protection of the intellectual properties (TRIPS).
The End User and/or ComAp’s Distributor shall only be permitted to use this End User's Guide /Manual with
ComAp Control System Registered Products. The Documentation is not intended and applicable for any other
purpose.