InteliLite Global Guide
92
GAS engine
The setpoint
has to be switched to the Gas position.
After the command for start is issued (pressing Start button in MAN mode, auto start condition is fulfilled in
AUTO mode or controller is switched to TEST mode), outputs
and
are energized for time period given by the setpoints
and
.
After
and
, starts countdown of
After
Sd Ventilation Time (page 202)
, the starter of engine is activated by energizing the output
When the engine speed exceeds 30RPM, the outputs
and
are energized.
When the engine speed exceeds value of
, the starter of engine is de-energized,
the engine is considered as started and the Idle period will follow.
IMPORTANT:
Additional running engine indications (page 117)
signals are not evaluated during the
start of a gas engine. The Pickup must be used in any case!
The maximum duration that the output
is energized is determined by the setpoint
Maximum Cranking Time (page 190)
. If the engine does not start within this period, outputs
and
are de-energized and a pause with length determined by
Cranking Fail Pause (page 190)
will follow.
,
and
outputs are active during the pause. After the pause has elapsed, the next start attempt is
executed. The number of start attempts is given by the setpoint
.
Once the engine is started, the Idle period follows. The binary output
remains
inactive (as it was during the start). The idle period duration is adjusted by the setpoint
After the idle period has finished, the output
is activated and the start-up
sequence is finished. The
phase follows.
Summary of Contents for InteliLite AMF25
