ComAp InteliLite AMF25 Global Manual Download Page 83

Page: 83 / 735

InteliLite Global Guide

5.4.1 General description

Remote display software works as “remote display and control” for the Master InteliLite family controller. Gen-

set can be controlled using Remote display and Master controller simultaneously and independently. All

Remote display screens (Measurement screens, Setpoint screens and History Log) displays the same data as

Master controller. Front panel buttons on both controllers work the same way. All remote display LEDs shows

the same state as corresponding LEDs on Master controller.

5.4.2 IL3-RD Firmware installation

The IL3-RD Remote display firmware is installed in the same way as any other InteliLite firmware using

InteliConfig PC tool. Reverting Remote display controller back to regular gen-set controller is carried out the

same way.

Note:

InteliConfig shows the most compatible and the most recent firmware as default option. Thus, it is

necessary use “More options” (…) button to pick IL3-RD firmware for uploading to controller. (See details on

picture below.)

Note:

IL3-RD consists firmware only, there is no archive included.

Note:

When IL3-RD firmware is uploaded to controller there is only possible connect InteliConfig using USB

connection. InteliConfig serves only for firmware update when connected to Remote display. There is no

Master controller SCADA displayed, no possibility to adjust Setpoints, display Values etc.

Note:

Please refer to InteliConfig Global Guide for details about firmware uploading to controller.

5.4.3 Wiring

IL3-RD can be connected to InteliLite family controller via external RS232 or RS485 communication line on CM-

232-485 communication module. It is possible to connect only up to two Remote displays to one Master

controller, if they are using different communication COMs. To connect two or more remote displays to one

communication line (e.g. RS485) is not possible. Using one Remote display it is possible to monitor only one

Master controller at the time.

Summary of Contents for InteliLite AMF25
































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for InteliLite AMF25

Reviews:

Related manuals for InteliLite AMF25

Brands by name

Popular brands

ComAp InteliLite AMF25, Global Manual

Search results

Summary of Contents for InteliLite AMF25

Reviews:

Related manuals for InteliLite AMF25

Brands by name

Popular brands