Canon Vizcam 1000, Service Manual

Page: 266 / 840

4. MECHANICAL SYSTEM
4-12
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
2. Removing the Developing Motor
1) Remove the rear cover 1 and the rear cover 2.
2) Remove the two screws, and remove the fly
wheel (left). (This applies only when removing
the M developing motor.)
3) Remove the four screws each [1], and
disconnect the two connectors each [2]; then,
remove the developing motor [3].
Figure 4-203B
C. Pick-Up Drive Assembly
1. Outline
See Figure 4-201C for how the pick-up
drive belt is routed.
Figure 4-201C
[1]
[1]
[2]
[3]