Canon Vizcam 1000, Service Manual

Page: 328 / 840

4. MECHANICAL SYSTEM
4-74
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
2. Keeping the Hopper Assembly
from Tumbling Down
1) Remove the hopper lower front cover, and
keep a screwdriver through the hole [1] as
shown in Figure 4-709A to keep the hopper
assembly from tumbling down.
3. Removing the Hoppers
1) Remove the hopper assembly.
2) Remove the hopper lower front cover, and
keep a screwdriver through the hole (See
chapter 4. VII. HOPPER SYSTEM, A-2.
Keeping the Hopper Assembly from Tumbling
Down).
3) Remove the five screws [1], and remove the
hopper top unit cover [2].
Figure 4-710A
Figure 4-711A
4) In the case of Y/M/C hopper, remove the
screw [3] and E-ring [4], and disconnect the
two connectors [5] for each color; then,
remove two screws [6] at the back.
[1]
[1]
[1]
[2]
[3]
[5]
[4]
[5]
Figure 4-712A