Canon Vizcam 1000, Service Manual

Page: 298 / 840

4. MECHANICAL SYSTEM
4-44
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5) Disconnect the two connectors [9], and loosen
the screw [10]; then, shift the locking plate [11]
to the left. 8) Fit the pin [14] on the transfer frame metal
fixing [1] into the hole [15] in the transfer belt
assembly [13] by lifting the transfer belt
assembly [13] slightly.
At this time, make sure that the transfer belt
assembly [13] is securely in the slit [16] in the
pin [14].
Figure 4-409A
6) Release the separation guide [12].
Figure 4-410A
7) Hold as shown in Figure 4-411A, and open the
transfer belt assembly [13].
Figure 4-411A
Figure 4-412A
[9]
[11]
[10]
[12]
[13]
[15]
[13]
[16] [14]
[1]