Canon Vizcam 1000, Service Manual

Page: 391 / 840

COPYRIGHT © 2001 CANON INC. CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-17
5. INSTALLATION
Step
13
14
15
16
17
Remarks Work
Press REG-APER to execute image
position correction.
Press the Reset key twice to end
service mode.
Pull out the cover switch actuator, and
close the front cover.
<M> <S> <R> <P> <F>
FUNC
DISP
ADJUST
COUNTER
OPTION
TEST
SGNL-Y
REF-Y
SIGG-Y
SGNL-M
REF-M
SIGG-M
SGNL-C
REF-C
SIGG-C
INSTALL
3/4
<M> <S> <R> <P> <F>
DISP
ADJUST
COUNTER
FUNC
OPTION
TEST
SGNL-S-Y SGNL-S-M SGNL-S-C SGNL-S-K
SGNL-D-Y SGNL-D-M SGNL-D-C SGNL-D-K
SIGG-D-Y SIGG-D-M SIGG-D-C SIGG-D-K PT-OFST-K
REF-S-Y REF-S-M REF-S-C REF-S-K
4/4 INSTALL
The initial ATR-related readings will be indicated on the 3rd/4th screen under ‘INSTALL’. Record
the readings on the service data sheet. (Press the
key to scan through the screens.) The
service data sheet is attached behind the document compartment of the front cover (left).
Press the key to bring up the 2nd screen of ‘INSTALL’. Press IMG-REG to select ‘1’.
<M> <S> <R> <P> <F>
FUNC
DISP
ADJUST
COUNTER
OPTION
TEST
IMG-REG
REG-APER
RECV-Y
LSNS-KIL
RECV-M RECV-C RECV-K
INSTALL 2/4
0
0
0
1
0 0 0
Before executing ‘REG-
APER’, check to make sure
that the transfer unit is at
locking position.
▼▼▼▼▼ ▼▼▼▼▼
▼▼▼▼▼ ▼▼▼▼▼