Canon Vizcam 1000, Service Manual

Page: 682 / 840

7-246
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
7. TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
<M> <S> <R> <P> <F>
ADJUST
DISP
FUNC
COUNTER
OPTION
TEST
HV-SP 2/4
SP-T1
xxxx
SP-T2
xxxx
SP-S1-2
xxxx
SP-S2-1
xxxx
SP-UT1
xxxx
SP-UT2
xxxx
SP-OHP
xxxx
SP-#
xxxx
SP-N1
xxxx
<<<<<<< ZONE A >>>>>>>
SP-N2
xxxx
SP-S1-1
xxxx
SP-S2-2
xxxx
SP-S3-1
xxxx
SP-S3-2
xxxx
BODY
BODY
BODY
xxx
xxx
xxx
˚C
%
g
Item
BODY °C
BODY %
BODY g
<<<ZONE-A>>>
SP-N1
SP-N2
SP-OHP
SP-#
SP-T1
SP-T2
SP-UT1
SP-UT2
SP-S1-1
SP-S1-2
SP-S2-1
SP-S2-2
SP-S3-1
SP-S3-2
Description
Indicates the machine internal temperature measured
by the environment sensor.
Indicates the machine internal humidity measured by
the environment sensor.
Indicates the machine internal humidity absolute value
(g) measured by the environment sensor.
Indicates the zone in which the setting shown is effec-
tive.
Effective in plain paper mode and, in addition, when
copying on a one-sided copy or on the 1st side of a
two-sided copy.
Effective in plain paper mode and, in addition, when
copying on the 2nd side of a two-sided copy.
Effective in OHP mode.
Effective during image position correction control.
Effective in thick paper mode and, in addition, copying
on a one-sided copy or on the 1st side of a two-sided
copy.
Effective in thick paper mode and, in addition, copying
on the 2nd side of a two-sided copy.
Effective in extra thick paper mode and, in addition,
when copying on the 1st side of a two-sided copy.
Effective in extra thick paper mode and, in addition,
when copying on the 2nd side of a two-sided copy.
Effective in special paper 1 mode and, in addition,
when copying on a one-sided copy or on the 1st side of
a two-sided copy.
Effective in special paper 1 mode and, in addition,
when copying on the 2nd side of a two-sided copy.
Effective in special paper 2 mode and, in addition,
when copying on a one-sided copy.
Effective in special paper 2 mode and, in addition,
when copying on the 2nd side of a two-sided copy.
Effective in thin paper and, in addition, when copying
on a one-sided copy or on the 1st side of a two-sided
copy.
Effective in thin paper and, in addition, when copying
on the 2nd side of a two-sided copy.
Remarks
Same as the reading
under ‘DISPLAY > ANA-
LOG’.
Settings: –5 to +5
Unit = 25 µA
Standard: 0
The setting of this item will return to the default value when the PCB is replaced or the RAM is cleared,
requiring input once again. Be sure to record any new setting you have made on the service label.
REF.
This mode will prove effective when correcting image distortion, separation faults, or feeding
faults under each item in question.