Canon Vizcam 1000, Service Manual

Page: 381 / 840

COPYRIGHT © 2001 CANON INC. CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-7
5. INSTALLATION
Step
1
2
3
4
Work
As if to invert the top and the bottom,
shake the Y toner container 20 times or
more.
Open the lid of the Y toner hopper, and
fit the Y toner bottle in the opening of
the hopper; hold the base of the bottle,
and turn the bottle clockwise until it
stops (about 10°).
Pull the slide shutter of the Y toner
bottle toward the front, and lightly tap
on the bottom and the side of the bottle
two to three times.
• Take note of the time at which toner
supply operation starts.
• Check to make sure that the toner
has poured into the hopper.
Close the slide shutter of the Y toner
bottle, and turn the bottle
counterclockwise (about 10°) to
remove.
Check to make sure no toner remains
on the mesh over the inlet to the
hopper; otherwise, tap on the hopper
until all toner has fallen into the hopper.
Remarks
C. Supplying Toner
Slide shutter
Do not perform this step until
immediately before setting
the bottle to the hopper.