Canon Vizcam 1000, Service Manual

Page: 405 / 840

COPYRIGHT © 2001 CANON INC. CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-31
5. INSTALLATION
H-2. Installing the Paper Deck-H1
• See “H-1. Installing the Paper Deck” frpm step 1) to 21).
Step
22
23
24
25
26
Remarks Work
Enter ‘2’ for DECK-SET .
Press DECK-P to select the size of
the paper used by the user.
Open the paper deck cover.
Remove the attachment from the front
and the rear of the deck lifter assembly.
Remove the four screws, and
disconnect the connector; then, heater.
Remove the four screws used to secure
the side guide plates (rear, front) in
place; then, shift the side guide plate.
Attachment
Connector
Screws
Paper deck
heater
Screws
If a diffferent paper size is desired, perform
the following:
At time of shipment from the factory, the
paper size is set to A3 extra-length or A3
(A4)/11x17 (LTR) with an attachment
installed (12x18).
• To switch to B4
• To use exclusively for A3/11x17