manualshive.com logo in svg

Buffalo TeraStation WSS 5000, User Manual, Page: 97 / 229

Share
Download
Buffalo TeraStation WSS 5000 User Manual Download Page 97

96

• 

If a network problem causes a replication error, unsynced data may be shown as "0" even though replication 
is incomplete. Click 

Resync

 to recover from the replication error. All files from the source folder will be copied 

to the target folder.

Failover

With failover, two TeraStations are connected to the network for redundancy. If a problem occurs in the main 
TeraStation so that it can no longer be accessed, operation is automatically switched to the backup TeraStation.

Notes: 

• 

Use identical model and capacity TeraStations for the main TeraStation and backup TeraStation. If the capacity 
of the main TeraStation is larger than that of the backup TeraStation, an I33 error will occur.

• 

All drive bays of a TeraStation should be occupied if it will be used for failover. Failover will not work if a drive 
is missing from any bay.

Ethernet Cable Connection Methods

Two different configurations for failover are available.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Reviews:

No comments