Buffalo TeraStation WSS 5000 User Manual Download Page 163

Page: 163 / 229

162

Check that the license pack was added to "Installed Licenses".

This completes authentication of an additional license.

Troubleshooting

Issue

Possible Cause

Possible Solution

Video recording does not start.

Surveillance Camera setting not
enabled.

Enable surveillance camera in
Settings.

A LAN cable between the
TeraStation and network camera
is disconnected, or the power is
turned off.

Check that the LAN cables are
inserted correctly.

The video recording policy is not
registered.

The device is not connected to a
network on the same LAN, or the
device is not connected to the LAN
port that was set in Settings.

Connect the device to the network
of the LAN port that was set in
Settings.

The disk is full.

Free available space on the disk by
moving or deleting files.

The time for the TeraStation and
network camera is not correct.

Set the time in Settings.

There are not enough camera
licenses for the network cameras.

Purchase and register an additional
license.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Search results

Summary of Contents for TeraStation WSS 5000

Reviews:

Related manuals for TeraStation WSS 5000

Brands by name

Popular brands

Buffalo TeraStation WSS 5000, User Manual

Search results

Summary of Contents for TeraStation WSS 5000

Reviews:

Related manuals for TeraStation WSS 5000

Brands by name

Popular brands