manualshive.com logo in svg

Buffalo TeraStation WSS 5000, User Manual

The Buffalo TeraStation WSS 5000 is a high-performance network-attached storage device, designed for efficient data management. With a comprehensive set of specifications, this versatile storage solution ensures seamless file sharing and secure data storage. Access user manuals with complete specifications for free download at manualshive.com, enhancing your user experience.

Share
Download
background image

223

Shared Folders

"share" (for both Windows and Mac computers). The recycle bin is enabled 
on "share" by default.

DHCP Client

Normally, the TeraStation will get its IP address automatically from a DHCP 
server on the network.
If no DHCP server is available, then an IP address will be assigned as follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the 
TeraStation.)
Subnet Mask: 255.255.0.0

Registered Groups

"hdusers", "admin", and "guest"
You cannot edit or delete these default groups.

Microsoft Network Group Settings

WORKGROUP

Ethernet Frame Size

1500 bytes (not including 14 bytes of header and 4 bytes of FCS)

AFP

Enabled

FTP

Disabled

NTP

Enabled

Print Server

Enabled

WebAccess

Disabled

Time Machine

Disabled

TeraSearch

Disabled

RAID Mode

8-drive, 6-drive, and 4-drive models: RAID 5
2-drive models: RAID 1

Specifications

Check the Buffalo website for information about the latest products and specifications.

LAN Port

Interface

IEEE 802.3ab (1000BASE-T)
IEEE 802.3u (100BASE-TX)
IEEE 802.3 (10BASE-T)

Transfer Speed

1000 Mbps full duplex (auto-negotiation)
100 Mbps full duplex/half duplex (auto-negotiation)
10 Mbps full duplex/half duplex (auto-negotiation)

Number of Ports

2 ports (supports Auto-MDIX)

Connector Type

RJ-45 8-pin

Protocol

TCP/IP

Access Method

CSMA/CD

File Sharing

SMB/CIFS, AFP, FTP/SFTP, NFS, HTTP/HTTPS

Management

HTTP/HTTPS

Jumbo Frames

1500, 4084, 7404, and 9216 byte modes are 
supported.
(not including 14 bytes of header and 4 bytes of FCS)

USB Port

8-drive models, 6-drive models, and 4-drive rackmount models: USB 2.0 Port (Series A) 
x 2, USB 3.0 Port (Series A) x 3
4-drive desktop models and 2-drive models: USB 2.0 Port (Series A) x 2, USB 3.0 Port 
(Series A) x 2

Note: 

Supported USB devices include Buffalo USB hard drives, USB UPS devices, and 

printers.

UPS Port

UPS Port (D-SUB 9 pin (Male)) x 1

Note: 

Compatible UPS are manufactured by Omron or APC.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Reviews:

No comments

Related manuals for TeraStation WSS 5000

D-Link Verizon DSL-2750B Connection Instructions preview
Verizon DSL-2750B
Brand: D-Link Pages: 2
D-Link DVA-2800 Quick Start Manual preview
DVA-2800
Brand: D-Link Pages: 4
Billion BiPAC 4500NZ(L) User Manual preview
BiPAC 4500NZ(L)
Brand: Billion Pages: 146
Abocom MH200 Quick Installation Manual preview
MH200
Brand: Abocom Pages: 11
Abocom CWB1000 Quick Installation Manual preview
CWB1000
Brand: Abocom Pages: 19
Ebyte E43-900T13S3 Manual preview
E43-900T13S3
Brand: Ebyte Pages: 8
JCG Q8 Quick Start Manual preview
Q8
Brand: JCG Pages: 2
D-Link DSR-500 User Manual preview
DSR-500
Brand: D-Link Pages: 213
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Brand: Grasslin Pages: 2
Gate NanoAAB User Manual preview
NanoAAB
Brand: Gate Pages: 8
JETWAY LI1B Series User Manual preview
LI1B Series
Brand: JETWAY Pages: 55
Tbus NV-ER1816i Installation Manual preview
NV-ER1816i
Brand: Tbus Pages: 25
Faderfox 4midiloop User Manual preview
4midiloop
Brand: Faderfox Pages: 10
Buffalo LinkStation Quick Setup Manual preview
LinkStation
Brand: Buffalo Pages: 2
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Brand: AYRSTONE Pages: 2
rtd IDAN-ID5915 User Manual preview
IDAN-ID5915
Brand: rtd Pages: 28
IMC Networks Wireless Outdoor Bridge XI-1500-IH Quick Installation Manual preview
Wireless Outdoor Bridge XI-1500-IH
Brand: IMC Networks Pages: 13
Hanwha Techwin WISENET XRN-1610 User Manual preview
WISENET XRN-1610
Brand: Hanwha Techwin Pages: 88

Brands by name

Popular brands

Load more brands