manualshive.com logo in svg

Buffalo TeraStation WSS 5000, User Manual, Page: 214 / 229

Share
Download
Buffalo TeraStation WSS 5000 User Manual Download Page 214

213

If you installed the TeraStation with the TeraNavigator CD, NAS Navigator2 was installed automatically. To launch it, 

click the 

 icon in the Dock.

Click on a TeraStation's icon to display:

• 

Total capacity 

• 

Used capacity 

• 

Workgroup 

• 

IP address 

• 

Subnet mask 

• 

Default gateway 

• 

MAC address 

• 

Firmware version 

Double-click it to open a share on the TeraStation.

Name

Description

Open

Opens the default shared folder for a selected TeraStation.

Refresh

Searches for NAS devices on the network again.

I'm here

Causes your TeraStation to beep.

Settings

Opens Settings for the selected TeraStation.

Configure

Opens a window that lets you configure NAS's IP address or 
open Settings.

Label Color

Selects the color of the name displayed below the icon.

View Options

Lets you choose icon size, position, and view mode.

Auto Power Mode

Auto power mode can turn supported TeraStations and 
LinkStations on the network on and off automatically.

To display these 
options, hold down 
the control key 
and select your 
TeraStation's icon.

Open Folder

Opens the TeraStation's shared folder.

Settings

Opens Settings for the selected TeraStation.

Configure

Opens a window that lets you change the NAS's IP address 
or open Settings.

I'm here

Causes your TeraStation to beep.

Label Color

Selects the color of the name displayed below the icon. The 
menu below is displayed when you click the TeraStation 
icon while holding down the control key.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Reviews:

No comments