manualshive.com logo in svg

Buffalo TeraStation WSS 5000, User Manual, Page: 176 / 229

Share
Download
Buffalo TeraStation WSS 5000 User Manual Download Page 176

175

• 

On the local network, Wake-on-LAN packets may be sent to port 2304 on either of the TeraStation's LAN 
ports. If the TeraStation is connected to a Buffalo wireless router configured for remote access, then it may be 
turned on from outside the local network (from the WAN side). To use this feature, connect the router to only 
LAN port 1 on the TeraStation.

• 

If you send a Wake-on-LAN packet to the current main TeraStation (originally the backup TeraStation) right 
after it replaces the faulty TeraStation via failover, Wake-on-LAN may not work. In such a case, restart the 
TeraStation once.

UPS (Uninterruptible Power Supply)

If a UPS (sold separately) is attached, the TeraStation can be automatically shut down for protecting data in the 
event of a power outage.

1 

Plug the power cable of the UPS to a wall socket.

2 

Connect the AC cable of the TeraStation to the UPS.

3 

Connect the UPS and TeraStation using a USB cable or serial cable.

4 

Turn on the UPS, then the TeraStation.

5 

In Settings, click 

Management

.

6 

Click 

 to the right of "UPS Sync".

7 

Click 

Edit

.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Reviews:

No comments