manualshive.com logo in svg

Buffalo TeraStation WSS 5000, User Manual, Page: 70 / 229

Share
Download
Buffalo TeraStation WSS 5000 User Manual Download Page 70

69

5 

Select the TeraStation name from the drop-down menu of "Target" and click 

Unregister iSCSI Device

.

6 

Click 

OK

.

Disconnecting a volume is finished.

Using with Multiple Computers

If the TeraStation is divided into multiple volumes (or drives), it can be used with multiple computers. However, 
multiple computers cannot be accessed from one volume (or one drive) at the same time.

Checking Whether iSCSI Volume is Connected

To check whether an iSCSI volume is connected, navigate to 

Drives

 - 

iSCSI

. Current volumes will be listed. If 

"Connected" is displayed under "Connection", the volume is currently connected from the client.

Configuring Access Restrictions

A username and password can be configured for the entire iSCSI volume or each existing volume. Access restrictions 
can be configured so that entering a username and password is required for each connection.
The TeraStation can perform mutual authentication (two-way authentication). Dual passwords ensure that only 
authorized client computers can access the volume on the TeraStation.
Follow the procedure below to enable access restrictions.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Reviews:

No comments