100
Service IP Address
The "service IP address" will be the new address of the backup TeraStation when it takes over operation from the
main TeraStation. If no service IP address is set, or a fixed IP address is set, an attempt is made to inherit the IP
address from the main TeraStation.
When the Main TeraStation Fails
Backup TeraStation Promotion Situations
•
The backup TeraStation cannot detect the main TeraStation within a specified time
If the backup TeraStation has not received the packet from the main TeraStation for a specified time, the backup
TeraStation considers the main TeraStation to have failed. By default, it will try 5 times and wait 60 seconds. If this
is triggered by accident, reconfigure failover from the main TeraStation.
•
The following error occurs
If any of the following errors occur, the main TeraStation will automatically shut down and the backup
TeraStation will take over from the main TeraStation:
E12 (cooling failure), E14 (cannot mount RAID array), E16 (drive not found), E22 (cannot mount drive), E30 (drive
failure)
Note:
The main TeraStation will shut down automatically when any of the above errors occur.
Displayed Messages
If network problems occur, the following messages may appear on the LCD display and in NAS Navigator2 even if
neither TeraStation has failed. If this happens, log in to both the main and backup TeraStation's Settings, reset the
failover settings, and configure it again.
•
The I49 message may appear for the backup TeraStation if the main TeraStation fails.
•
The E27 message may appear for the main TeraStation if it cannot detect the backup TeraStation on the network.
Switching to the Backup Unit Manually
If "Switch to backup unit manually" is selected in Settings, the backup TeraStation will not replace the main
TeraStation automatically. If the main TeraStation fails, there are two ways to have the backup unit replace the main
unit manually on the network:
•
In Settings, click on the "Set as Main Unit" button.
•
Or, press and hold down the function button on the backup TeraStation.
Backing Up Your Mac with Time Machine
Time Machine is a backup program included with OS X 10.5 or later. Configure your TeraStation as shown to use
Time Machine.
1
In Settings, click
File Sharing
.
Summary of Contents for TeraStation WSS 5000
