manualshive.com logo in svg

Buffalo TeraStation WSS 5000, User Manual, Page: 170 / 229

Share
Download
Buffalo TeraStation WSS 5000 User Manual Download Page 170

169

Real-time Scan

The virus scan runs in the background, scanning every file that you read or write. This is the default type of scanning. 
Your TeraStation may run slower if real-time scanning is enabled.

Scheduled Scan

A scheduled scan is executed at specific regular intervals, such as every Tuesday at 3 am.

Manual Scan

A manual scan runs once when initiated. Initiate a manual scan as described below.

1 

From the left-side menu, choose 

Scan Options

 - 

Manual Scan

.

2 

Click 

Scan now

.

This starts the virus scan.

If the scan finds a virus, the user can be notified in two ways:

• 

The I34 virus alert message is normally shown on the LCD panel. Once the virus is removed from the quarantine 
folder, the message is no longer displayed. If the antivirus software is configured to delete viruses from the 
quarantine folder automatically, then the I34 virus alert message will not be displayed.

• 

If email notification is enabled in Settings, then the antivirus software notifies the user by email if a virus is found. 
Enabling email notifications is recommended.

Depending on how many files are on your TeraStation, a virus scan may take several hours. Estimated scanning 
times are shown below.

• 

10,000 files: ~ 30 minutes

• 

100,000 files: ~ 5 hours

• 

1,000,000 files: ~ 50 hours

Checking the Log

Follow the procedure below to check the virus scan log.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Reviews:

No comments