Buffalo TeraStation WSS 5000, User Manual, Page: 107 / 229

106
These devices are supported:
• USB mass storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras and other PTP devices
• UPS devices that are specifically indicated as compatible
• USB printers
These devices are not supported:
• USB hubs
• Mice
• Keyboards
1
In Settings, click Backup .
2
Move the Direct Copy switch to the position to enable Direct Copy.
3
Connect the USB device. When it mounts (about 10 seconds), the function button will light up.
Note: Devices that don't trigger the function button to flash are not supported.
4
You have 60 seconds to hold down the function button for 3 seconds. This will copy all files from the USB
device to the Direct Copy folder of the TeraStation.
Notes:
• While the function button is flashing, press and release it quickly to cancel Direct Copy.
For digital cameras that are not in the USB mass storage class, all files in the digital camera are copied.
• To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit , select a new folder, and click
OK .
5
When the copy operation is finished, the access LED of the USB device will stop flashing. Hold down the
function button for 6 seconds to dismount the device. The blue LED will go out and the and the device may be
removed safely.