Buffalo TeraStation WSS 5000 User Manual Download Page 217

Page: 217 / 229

216

For Windows 8.1 and Windows 8, click

iSCSI Connection Tool

Home Screen

Name

Description

Target

If a TeraStation is selected, clicking

Register iSCSI Device

will register all the

volumes in the TeraStation to the computer for enabling connection to
individual volumes.
If a volume is already registered, click

Unregister iSCSI Device

to unregister

all volumes, disconnecting them from the TeraStation.

Model

Displays TeraStation's model name.

Series

Displays TeraStation's series name.

IP Address

Displays TeraStation's IP address.

Subnet Mask

Displays TeraStation's subnet mask.

Firmware

Displays TeraStation's firmware version.

MAC Address

TeraStation's MAC address.

iSCSI Service

Shows whether the iSCSI service of the TeraStation is running or stopped.

Volume

Select individual volumes from a registered TeraStation.
Select a volume and click

Connect

, then the selected volume will be

recognized as a local drive in My Computer on your computer. If a volume
is connected, click

Unregister

to disconnect it.

Current status

Displays current status of the selected volume.
- Disconnected: Volume is disconnected.
- Connected: Volume is connected.
- Connected to another PC: Volume is connected to another computer.
Displays the other computer's IP address.

Summary of Contents for TeraStation WSS 5000






































































































































































































































Search results

Summary of Contents for TeraStation WSS 5000

Reviews:

Related manuals for TeraStation WSS 5000

Brands by name

Popular brands

Buffalo TeraStation WSS 5000, User Manual

Search results

Summary of Contents for TeraStation WSS 5000

Reviews:

Related manuals for TeraStation WSS 5000

Brands by name

Popular brands