Buffalo TeraStation WSS 5000, User Manual, Page: 92 / 229

91
Type Files included
Management backup
Each time a backup is executed, management information is stored, and
only files that have changed are copied or deleted. Data is retrieved from
the previous backup file for files that were not changed. This is useful for
making backups with limited space or for referencing status at a particular
point in time (for use for data snapshot applications). The destination folder
for a management backup should be a local folder on this TeraStation or on a
USB drive attached to it. The target folder will be set to read-only. Do not use
folders from drives formatted with FAT.
You can specify how many backup versions to keep from 1–400, or select
"Unlimited" to keep all backups until the drive is full. If a specific number of
backup versions is specified, the backup destination folder should be on the
same TeraStation that the backup job is configured from, or on an external
USB drive attached to that TeraStation.
5
Click Add .
6
Click Browse under "Backup Source Folder Name".
7
Select the shared folder that will be the backup source, then click OK .
8
Click Browse under "Backup Target Folder Name".