Servicing Exit Hardware Trim Escutcheon Parts
10–22
B.A.S.I.S. V Service Manual
S
ERVICING
THE
YOKE
Each time you service the yoke you need to replace the following parts
with new parts:
■
escutcheon gasket (C64564)
■
cable tie
■
lift finger screw (
page 4–9
)
■
mounting plate screws (
page 4–9
)
■
4 shoulder screws (
page 4–10
).
Removing the yoke
1. Remove the following parts:
■
escutcheon from the door (
page 8–13
)
■
mounting standoffs (
page 10–2
)
■
escutcheon gasket (
page 10–3
)
■
lift finger (
page 10–4
)
■
mounting plate (
page 10–6
)
■
lever return springs (
page 10–8
).
2. Unscrew the 4 shoulder screws and discard. See
Figure 10.12
.
3. Remove the yoke from the escutcheon.
Figure 10.12
Removing and reinstalling the yoke
Shoulder screws
Shoulder screws
Yoke
Summary of Contents for B.A.S.I.S. V
