Servicing Standard Mortise Case Parts
B.A.S.I.S. V Service Manual
6–5
The following table shows how the bolts, hubs, and cylinder clamp
plate should be oriented for the hand and bevel options. The
orientation indicated assumes that the case is on a flat surface, the case
cover has been removed, and the part is in the case.
Changing the
hand only
Refer to the detailed instructions for each task that follows.
1. Remove and open the mortise case (
page 6–2
).
2. Perform the steps in
Turning over the hubs
(
page 6–6
).
3. If the lock has key override, perform the steps in
Turning over the
cylinder clamp plate
(
page 6–7
).
4. Perform the steps in
Turning over the auxiliary bolt
(
page 6–8
).
5. Perform the steps in
Turning over the latchbolt
(
page 6–9
).
6. Close and reinstall the mortise case (
page 6–2
).
Changing the
bevel only
Refer to the detailed instructions for each task that follows.
1. Remove and open the mortise case (
page 6–2
).
2. Perform the steps in
Turning over the auxiliary bolt
(
page 6–8
).
3. Perform the steps in
Turning over the latchbolt
(
page 6–9
).
4. Close and reinstall the mortise case (
page 6–2
).
Changing the
hand and bevel
Refer to the detailed instructions for each task that follows.
1. Remove and open the mortise case (
page 6–2
).
2. Perform the steps in
Turning over the hubs
(
page 6–6
).
3. If the lock has key override, perform the steps in
Turning over the
cylinder clamp plate
(
page 6–7
).
4. Close and reinstall the mortise case (
page 6–2
).
Bolts
Outside hub Inside hub
Clamp plate
LH
bevel up
top
bottom
screw up
RH
bevel down
bottom
top
screw down
LHRB
bevel down
top
bottom
screw up
RHRB
bevel up
bottom
top
screw down
Summary of Contents for B.A.S.I.S. V
