Servicing Exit Hardware Trim Escutcheon Parts
10–28
B.A.S.I.S. V Service Manual
S
ERVICING
THE
SHEAR
PIN
Replacements kits are available for shear pins. See
page 4–10
.
Each time you service the shear pin you need to replace the following
parts with new parts:
■
escutcheon gasket (C64564)
■
cable tie
■
lift finger screw (
page 4–9
)
■
mounting plate screws (
page 4–9
)
■
4 shoulder screws (
page 4–10
).
Removing the shear
pin
1. Remove the following parts:
■
escutcheon from the door (
page 8–13
)
■
mounting standoffs (
page 10–2
)
■
escutcheon gasket (
page 10–3
)
■
lift finger (
page 10–4
)
■
mounting plate (
page 10–6
)
■
lever return spring (
page 10–8
)
■
yoke (
page 10–22
)
■
beam and beam roller (
page 10–24
)
■
lever assembly (
page 10–26
).
2. Remove the shear pin from the lever. See
page 10–28
.
Figure 10.16
Removing and reinstalling the shear pin
Shear pin
Summary of Contents for B.A.S.I.S. V
