Servicing Standard Outside Escutcheon Parts
9–20
B.A.S.I.S. V Service Manual
Reinstalling the
magnetic stripe
reader assembly
1. Orient the magnetic stripe reader assembly and insert the reader
harness through the slot in the outside escutcheon. See
Figure 9.17
.
2. Position the reader assembly on the reader gasket and install the
four reader assembly mounting screws. See
Figure 9.15
.
3. Reinstall the following parts:
■
electronics board (
page 9–13
)
■
primary harness (
page 9–8
, step 1)
■
sensor harness (
page 9–6
)
■
upgrade cable (
page 9–5
)
■
harness clamp (
page 9–4
)
■
escutcheon gasket (
page 9–2
)
■
inside and outside escutcheons. For mortise lock instructions, see
page 5–6
. For cylindrical lock instructions, see
page 7–8
.
,
Figure 9.17
Positioning the magnetic stripe reader assembly
Reader harness
Magnetic stripe
reader assembly
Outside escutcheon
Slot
Reader gasket
Summary of Contents for B.A.S.I.S. V
