BEST ACCESS SYSTEMS B.A.S.I.S. V, Service Manual

Page: 256 / 290

Installation Instructions for B.A.S.I.S. Mortise Locks
BEST ACCESS SYSTEMS
Indianapolis, Indiana
Completing the installation
12
16
Install inside and outside levers
1 Unscrew the inside spindle one full turn to allow the
spindles to turn freely.
2 With the handle pointing toward the door hinges,
insert the outside lever and spindles assembly into the
lock from the outside of the door.
3 Slide the inside lever onto the inside spindle and
secure it with the set screw.
4 Making sure that the core is positioned properly in the
outside escutcheon (EV and FV only) and the
escutcheons are aligned properly on the door, tighten
the escutcheon mounting screws.
Note: If a core is not available, you can use the cylinder
wrench (ED211) to help you align the core opening in the
escutcheon.
5 Turn the levers to check that they operate smoothly.
Figure 16 Installing the levers
Spindles
Location
of set
screw
Outside of door Inside of door
Spindles
Outside of door