Servicing Exit Hardware Trim Escutcheon Parts
10–8
B.A.S.I.S. V Service Manual
S
ERVICING
THE
LEVER
RETURN
SPRINGS
Each time you service the lever return springs you need to replace the
following parts with new parts:
■
escutcheon gasket (C64564)
■
cable tie
■
lift finger screw (
page 4–9
)
■
mounting plate screws (
page 4–9
).
Removing the lever
return springs
1. Remove the following parts:
■
escutcheon from the door (
page 8–13
)
■
mounting standoffs (
page 10–2
)
■
escutcheon gasket (
page 10–3
)
■
lift finger (
page 10–4
)
■
mounting plate (
page 10–6
).
2. Remove the lever return springs from the yoke. See
Figure 10.5
.
Reinstalling the
lever return springs
1. Install the lever return springs onto the yoke posts. See
Figure 10.5
.
2. Reinstall the following parts:
■
mounting plate (
page 10–7
)
■
lift finger (
page 10–5
)
■
escutcheon gasket (
page 10–3
)
■
mounting standoffs (
page 10–2
)
■
escutcheon on the door (
page 8–14
).
Figure 10.5
Removing and reinstalling the lever return springs
Yoke
Lever return springs
Summary of Contents for B.A.S.I.S. V
