BEST ACCESS SYSTEMS B.A.S.I.S. V, Service Manual

Page: 171 / 290

Servicing Standard Outside Escutcheon Parts
B.A.S.I.S. V Service Manual 9–25
3. Remove the dual validation reader assembly from the outside
escutcheon, sliding the reader cable through the slot in the
escutcheon. See
Figure 9.22 .
Note: To determine the read head track position for ordering a dual
validation reader replacement kit, look at the back of the reader for
the label that states, “This reader was factory set to read dual
validation track no. 1 2.” The track number is circled. If there is no
label, the track number is 3.
Figure 9.22 Removing the dual validation reader assembly from the outside
escutcheon
Reader cable
Dual validation
reader assembly
Outside escutcheon