BEST ACCESS SYSTEMS B.A.S.I.S. V, Service Manual

Page: 271 / 290

Installation Instructions for B.A.S.I.S. Cylindrical Locks
BEST ACCESS SYSTEMS
Indianapolis, Indiana
11
Installation Instructions for B.A.S.I.S. Cylindrical Locks
Completing the installation
17
Install core and throw member
1 Install the blocking plate onto the throw member.
Caution: You must use the blocking plate to
prevent unauthorized access.
2 Insert the control key into the core and rotate the key
15 degrees to the right.
3 Insert the throw member into the core.
4 Insert the core and throw member into the lever with
the control key.
5 Rotate the control key 15 degrees to the left and
withdraw the key.
Caution: The control key can be used to remove
cores and to access doors. Provide adequate
security for the control key.
18
Install battery compartment door
1 Making sure that the battery compartment door
does not pinch any wires
, insert the tabs of the
battery compartment door into its mating slots and
swing the door closed.
2 Use a T15 TORX bit driver to secure the battery
compartment door with the security screw. Tighten
firmly.
Figure 17a Installing the blocking plate and throw member
Core
Blocking
plate
Throw
member
Figure 17b Installing the core
Core
Control
key
Throw
member
Figure 18 Installing the battery compartment door
Tabs
Security
screw