BEST ACCESS SYSTEMS B.A.S.I.S. V, Service Manual

Page: 177 / 290

Servicing Exit Hardware Trim Escutcheon Parts
B.A.S.I.S. V Service Manual 10–3
S
ERVICING THE ESCUTCHEON GASKET
Each time you service the escutcheon gasket you need to replace it
with a new gasket. Use part number C64564 when ordering.
Removing the
escutcheon gasket
1. Remove the followings parts:
■
escutcheon from the door ( page 8–13 )
■
mounting standoffs ( page 10–2 ).
2. Peel the gasket off the escutcheon and discard. See Figure 10.2 .
Note:
You may need to scrape remnants of the gasket from the
escutcheon.
Reinstalling the
escutcheon gasket
1. Starting at the bottom of the gasket, peel away the protective
backing a small amount at a time while unrolling the gasket into
position on the escutcheon.
2. Press the gasket into place on the escutcheon. See Figure 10.2 .
3. Reinstall the following parts:
■
mounting standoffs ( page 10–2 )
■
escutcheon on the door ( page 8–14 ).
Figure 10.2 Removing and reinstalling the escutcheon gasket
Escutcheon gasket