Altigen AltiContact Manager Version 5.0, Administration Manual

Page: 166 / 542

Defining System Call Restrictions
5-16 AltiContact Manager Administration Manual
Figure 8. Speed Dial Configuration
Select the ID number using the drop-down arrow, type in a name for the
Speed Dial entry, then enter the full number as you would dial it, with a
maximum of 20 digits per entry. For example, the phone number
914085551212 comprises of 9 (trunk access code), 1 (long distance prefix),
followed by 408 (area code), and finally the seven digit telephone number.
Valid digits include 0 through 9, #, *, and (,) comma. The comma
represents a one (1) second pause.
Note:
System speed dial is read-only from AltiView and AltiAgent.
Defining System Call Restrictions
Call Restriction allows you to block outgoing calls for up to 20 prefixes.
This window also provides for blocking all outgoing calls and for enabling
hop off to other trunks when that function has been set up.
The restrictions you set up here are global restrictions.
Note:
The dialing restrictions set here are one of three ways of blocking
calls. See “About Restricting Outgoing Calls” on page 10-1 for a
discussion of the uses of the different functions.
To access call restriction setup, select System Management... on the
Management menu, then click the Call Restriction tab.