133 • Schlage • ENGAGE Managed Property User's Guide
LE and LEB ENGAGE Devices
Installation and Commissioning
For best results
, ensure the following:
• Verify the chassis can be dry fit into the
mortise pocket before final installation,
without damaging external wiring.
• The Request-To-Exit (RTE), Door Position
Sensor (DPS) and other wiring should be
verified.
• Ensure the latch is in the correct direction with
the latch bevel towards the door opening.
• The Spring Cage Arrow direction is
mounted properly with the arrows
pointing in the lever down
direction.
• The RX module switch and
Handing Screw is on the SECURE
side of the mortise chassis
(inside).
WARNING:
If you are
changing the handing
direction, be VERY careful not
to damage the RX
microswitch during the
handing process.
Fig. 11.21: Latch Direction
Fig. 11.22: Spring Cage Arrow Direction
Fig. 11.23: Handing Screw & Microswitch
