156 • Schlage • ENGAGE Managed Property User's Guide
CTE Controller with Multi-Technology Readers
Installation and Commissioning
Fig. 11.68: Select CTE Device
Note:
Î
The CTE “advertises” for 2 minutes to allow selection. When the device appears in this
screen, the number is the device serial number.
WARNING:
If no device information is displayed, ensure the following:
•
•
The CTE is Out-Of-The-Box or recently had a Factory Default Reset.
•
•
The Mobile device has Bluetooth turned ON
•
•
The Mobile device is in Bluetooth communication (BLE) range of the CTE.
•
•
The CTE is “advertising” via Bluetooth (BLE)
To try again, select Back
9. After the CTE has been selected, it will connect to the device and then ask you to verify the LED is
blinking
RED.
Fig. 11.69: Connecting
Fig. 11.70: Light Blinking
10. After verifying the LED is blinking, select
Yes
. It will ask you to
Please Wait
while it processes.
