153 • Schlage • ENGAGE Managed Property User's Guide
CTE Controller with Multi-Technology Readers
Installation and Commissioning
Note:
Î
CTE Master Construction Credentials do not provide access. Master Construction
Credentials can only add other User Access Construction Credentials to each installed
CTE. If a credential is
not presented within 20 seconds
a timeout will occur and the
CTE will begin working as an access control device again. Repeat steps 1-5.
Create User Construction Credentials
Once the Master Construction Credential has been
created, User Access Construction Credentials can
be added to the installed CTE.
User Access Construction Credentials allow
momentary (Normal) access before the CTE is
commissioned.
1. Present the
Master Construction Credential
to the reader.
• The STATUS LED on the PCB and the reader’s LED will light
GREEN
for 20 seconds.
2. Within 20 seconds, present a
USER Construction Credential
to the reader.
• The STATUS LED on the PCB and the reader’s LED will blink
GREEN
5 times.
• To create additional User Credentials, repeat steps 1-2.
3. Present a newly created
User Construction Credential
to the reader.
4. Verify that access is granted.
CAUTION:
The Master Construction
Credential must be programmed before
creating any User Access Construction
Credentials.
