141 • Schlage • ENGAGE Managed Property User's Guide
NDE80 and NDEB ENGAGE Devices
Installation and Commissioning
Install the Device
1. Install the NDE or NDEB as indicated
in the Installation Instructions.
WARNING:
Ensure cable is
routed with no pinching and
with both cable connections
properly seated in the proper
channels.
CAUTION:
Ensure the
installed latch and chassis are
properly aligned and fully
engaged.
WARNING:
For non-
standard door thickness,
carefully follow the door
thickness adjustment steps
outlined in the Door Thickness
Adjustment section.
2. Insert the chassis into the installed
latch.
3. Check the Latch prongs and the Retractor
Slide engagements are properly connected.
4. Align Latch prongs and Chassis slide
WARNING:
The latch
prongs MUST fully engage
the top and bottom chassis
slides. The installed latch
MUST be centered in the
chassis and door.
Fig. 11.42: Connect Chassis Cables
