![ABB REL670 2.2 IEC Applications Manual Download Page 849](http://html.mh-extra.com/html/abb/rel670-2-2-iec/rel670-2-2-iec_applications-manual_4789849.webp)
Section 22
Remote communication
22.1
Binary signal transfer
IP12423-1 v2
22.1.1
Identification
M14849-1 v3
Function description
IEC 61850 identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Binary signal transfer,
receive
BinSignRec1_1
BinSignRec1_2
BinSignReceive2
-
-
Binary signal transfer, 2Mbit
receive
BinSigRec1_12M
BinSigRec1_22M
-
-
Binary signal transfer,
transmit
BinSignTrans1_1
BinSignTrans1_2
BinSignTransm2
-
-
Binary signal transfer, 2Mbit
transmit
BinSigTran1_12M
BinSigTran1_22M
-
-
22.1.2
Application
IP16245-1 v1
M12844-3 v4
The IEDs can be equipped with communication devices for line differential
communication (not applicable for RER670) and/or communication of binary
signals between IEDs. The same communication hardware is used for both
purposes.
Sending of binary signals between two IEDs is used in teleprotection schemes and
for direct transfer trips. In addition to this, there are application possibilities, for
example, blocking/enabling functionality in the remote substation, changing setting
group in the remote IED depending on the switching situation in the local
substation and so on.
If equipped with a 64kbit/s LDCM module, the IED can be configured to send
either 192 binary signals or 3 analog and 8 binary signals to a remote IED. If
equipped with a 2Mbps LDCM module, the IED can send 9 analog channels and
192 binary channels to a remote IED.
Link forwarding
GUID-DD3CF47C-A202-4416-954A-EFC0F8BEBCB7 v1
If it is not possible to have a communication link between each station, the solution
has been to set the protection up in a slave-master-slave configuration. This means
that in Figure
, only IED-B has access to all currents and, therefore, this is the
only place where the differential current is evaluated. If the evaluation results in a
trip, the trip signal will be sent over the two communication links.
1MRK 506 369-UEN B
Section 22
Remote communication
Line distance protection REL670 2.2 IEC
843
Application manual
Summary of Contents for REL670 2.2 IEC
