![background image](http://html.mh-extra.com/html/abb/615-series-ansi/615-series-ansi_technical-manual_4665614.webp)
1MAC050144-MB C
Section 9
Recording functions
615 series ANSI
607
Technical Manual
Table 510: Non-group analog channel settings for digital fault recorder
Table 511: Non-group binary channel settings for digital fault recorder
Parameter
Values (Range) Unit
Step
Default
Description
Operation
1=Enable
5=Disable
1
1=Enable for
Channels 1 - 4
5=Disable for
channels 5 - 8
Analog
channel is
enabled or
disabled
Channel
selection
1
1. Refer to the application manual for channel allocation for each configuration.
0
Select the
signal to be
recorded by
this channel
Channel id text
0 to 64
characters,
alphanumeric
DR analog
channel X
Identification
text for the
analog
channel used
in the
COMTRADE
format
High trigger
level
0.00...60.00
pu
0.01
10.00
High trigger
level for the
analog
channel
Low trigger
level
0.00...2.00
pu
0.01
0.00
Low trigger
level for the
analog
channel
Storage mode
0=Waveform
1=Trend /
cycle
1
0
Storage mode
for the analog
channel
Parameter
Values (Range) Unit
Step
Default
Description
Operation
1=Enable
5=Disable
1
5=Disable
Binary channel
is enabled or
disabled
Level trigger
mode
1=Positive or
Rising
2=Negative or
Falling
3=Both
4=Level trigger
off
1
1=Rising
Level trigger
mode for the
binary channel
Storage mode
0=Waveform
1=Trend /
cycle
1
0
Storage mode
for the binary
channel
Channel id text
0 to 64
characters,
alphanumeric
DR binary
channel X
Identification
text for the
analog
channel used
in the
COMTRADE
format
Summary of Contents for 615 Series ANSI
