manualshive.com logo in svg

Siemens SINAMICS G, Список руководств

Поделиться
Скачать
Siemens SINAMICS G Скачать руководство пользователя страница 550

Faults and Alarms

List of faults and alarms

3-550

 Siemens AG 2004 All Rights Reserved

SINAMICS G List Manual, Edition 12.2004

Remedy:

Use the existing drive object with the corresponding number.
See also: p4815

A02006

Function generator: No drive specified for connection

Reaction:

NONE

Acknowledge:

NONE

Cause:

No drive specified for connection in p4815.
See also: p4815

Remedy:

At least one drive to be connected must be specified in p4815.
See also: p4815

A02007

Function generator: Drive not SERVO

Reaction:

NONE

Acknowledge:

NONE

Cause:

The drive object specified for connection is not a SERVO.
See also: p4815

Remedy:

Use a SERVO drive object with the corresponding number.

A02010

Function generator: Speed setpoint from the drive is not zero

Reaction:

NONE

Acknowledge:

NONE

Cause:

The speed setpoint of a drive - selected to be connected to - is greater than the value for the standstill detection set 
using p1226.
Alarm value (r2124, decimal):
Number of the drive object involved.

Remedy:

For all of the drives specified for connection, set the speed setpoints to 0.

A02011

Function generator: Speed actual value not zero

Reaction:

NONE

Acknowledge:

NONE

Cause:

The speed actual value of a drive - selected to be connected to - is greater than the value for the standstill detection 
set using p1226.
Alarm value (r2124, decimal):
Number of the drive object involved.

Remedy:

Set the relevant drives to zero speed before starting the function generator.

A02015

Function generator: Drive enable signals missing

Reaction:

NONE

Acknowledge:

NONE

Cause:

The master control and/or enable signals are missing to connect to the specified drive.
Alarm value (r2124, decimal):
Number of the drive object involved.
See also: p4815

Remedy:

Fetch the master control to the specified drive object and set all enable signals.

A02020

Function generator: Parameter cannot be changed

Reaction:

NONE

Acknowledge:

NONE

Cause:

This parameter setting cannot be changed when the function generator is active (p4800 = 1).
See also: p4810, p4812, p4813, p4815, p4820, p4821, p4822, p4823, p4824, p4825, p4826, p4827, p4828, p4829

Remedy:

- stop before parameterizing the function generator (p4800 = 0).
- if required, start the function generator (p4800 = 1).
See also: p4800

A02025

Function generator: Period too short

Reaction:

NONE

Acknowledge:

NONE

Содержание SINAMICS G





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды