Sharp MX-2300N Guide, Руководство пользователя, Страница: 492 / 786

71
SPECIFYING THE SEND SIZE OF THE ORIGINAL
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
• The send size cannot be specified when [TIFF-S] is selected for the format. (The send size is fixed at 8-1/2" x 11"R (A4R).)
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
2
Touch the [Send Size] key.
3
Specify the send size.
(1) Touch the desired send size key.
(2) Touch the [OK] key.
• Size keys that cannot be specified for the send size are grayed out to prevent selection.
• To specify an AB size for the send size, touch the [AB Inch] key to highlight the [AB] side and then specify the
send size.
4
Touch the [OK] key.
The ratio used for reduction or enlargement of the original will
appear between the "Scan Size" and the "Send Size".
Quick File
File
Special Modes
Address Entry
Address Book
Internet Fax
Mode Switch
Image
Settings
Send Settings
Manual RX
Auto
Exposure
200x100dpi
Resolution
TIFF-F
File Format
Special Modes
Original
Auto 8 x11 1
/
2
(1) (2)
Auto
100%
Internet Fax
Original
OK
Scan Size Send Size
Image Orientation
Auto 8 x11 1
/
2
2-Sided
Booklet
2-Sided
Tablet
Internet Fax
Original OK
Auto
Manual
8 x11R
AB Inch
1
/
2
5 x8 1
/
2
1
/
2
11x17
8 x13 1
/
2
5 x8 R 1
/
2
1
/
2
8 x14 1
/
2
8 x11 1
/
2
Long Size
Manual
(2) (1)
141%
Internet Fax
Original
OK
Scan Size Send Size
Image Orientation
11x17
2-Sided
Booklet
2-Sided
Tablet
Auto 8 x11 1
/
2