Sharp MX-2300N Guide, Руководство пользователя, Страница: 477 / 786

56
Specifying the size by entering numerical values.
When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size.
The width can be from 2-1/2" to 17" (64 mm to 432 mm), and the length can be from 2-1/2" to 11-5/8" (64 mm to 297 mm).
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The automatically detected size appears at the top of the
[Original] key.
2
Touch the [Scan Size] key.
3
Enter the scan size.
(1) Touch the [Size Input] tab.
(2) Touch the [X] key and enter the X
(horizontal) dimension with the
keys.
(3) Touch the [Y] key and enter the Y (vertical)
dimension with the keys.
(4) Touch the [OK] key.
System Settings (Administrator): Original Size Detector Setting
This is used to set the size entry screen to "inch units" or "mm units".
4
Touch the [OK] key.
The specified size appears in the [Scan Size] key.
• When the scan size is specified by numerical values, the send size cannot be specified.
• When the automatic document feeder is used, an original longer that 17" (432 mm) can be scanned (maximum length
31-1/2" (800 mm)). To scan a long original, touch the [Standard Size] tab in the screen of step 3 and then touch the [Long
Size] key.
☞
Specifying the size using paper sizes (page 55)
Special Modes
USB Mem. Scan
Mode Switch
Image
Settings
File Name
Auto
Exposure
200x200dpi
Resolution
TIFF/JPEG
File Format
Mono2/Auto
Color Mode
Special Modes
Original
Auto 8 x11 1
/
2
(1) (2)
100%
OK
Scan Size Send Size
Auto
Image Orientation
USB Mem. Scan
Original
Auto 8 x11 1
/
2
2-Sided
Booklet
2-Sided
Tablet
USB Mem. Scan
Original
17
11
OK
Size Input
Standard Size
(2_1/2 17)
inch
(2_1/2 11_5/8)
inch
X
Y
Auto
Manual
Manual
X
Y
(4) (2), (3) (1)
OK
Scan Size Send Size
Auto
Image Orientation
X17 Y11
USB Mem. Scan
Original
2-Sided
Booklet
2-Sided
Tablet