Omron SYSDRIVE 3G3RV, Руководство пользователя, Страница: 95 / 446

Digital Operator
3-
3
K K K K
Digital Operator Keys
The
names and functions of the Digital Operator Keys are described in Table 3.1.
Note Except
in diagrams, Keys are referred to using the Key names listed in the above table.
Table 3.1 Key Functions
Key Name Function
LOCAL/REMOTE
Key
Switches
between operation via the Digital Operator (LOCAL) and
control
circuit terminal operation (REMOTE).
This
Key can be enabled or disabled by setting parameter o2-01.
MENU
Key
Selects
menu items (modes).
ESC
Key
Returns
to the status before the ENTER Key was pressed.
JOG
Key
Enables
jog operation when the Inverter is being operated from the
Digital
Operator.
FWD/REV
Key
Selects
the rotation direction of the motor when the Inverter is being
operated
from the Digital Operator.
Digit
Selection/RESET Key
Sets
the number of digits for parameter settings.
Also
acts as the Reset Key when a fault has occurred.
Increment
Key
Selects
menu items, sets parameter numbers, and increments set val-
ues.
Used
to move to the next item or data.
Decrement
Key
Selects
menu items, sets parameter numbers, and decrements set val-
ues.
Used
to move to the previous item or data.
ENTER
Key
Pressed
to enter menu items, parameters, and set values.
Also
used to switch from one screen to another.
RUN
Key
Starts
the Inverter operation when the Inverter is being controlled by
the
Digital Operator.
STOP
Key
Stops
Inverter operation.
This
Key can be enabled or disabled when operating from the control
circuit
terminal by setting parameter o2-02.
L O C A L
REMOTE
MENU
ESC
JOG
FWD
REV
RESET
RUN
STOP