NEC NEAX 2000, Руководство по программированию

Страница: 970 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 188
Revision 1.0
(1/1)
INCOMING CALL IDENTIFICATION
GENERAL DESCRIPTION
This service feature allows an Attendant to visually identify the type of service and/or trunk group
which is arriving or waiting to be answered at the Attendant Console.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
No manual operation is required.
SERVICE CONDITIONS
1. A flashing lamp indicates a call waiting to be answered.
2. A steady green LED indicates an answered call.
3. A maximum of 12 lamp and key groups can be associated with INCOMING CALL IDENTIFICA-
TION.
4. An example of lamp and key assignment is as follows:
LDN : Listed Directory Number Calls
ATND : Attendant Recall Calls
RCL : Attendant Recall Calls
ICPT : Intercept
NANS : Station No Answer
BUSY : Call Forwarding Busy
TIE : Tie Line
5. More than one INCOMING CALL IDENTIFICATION lamp can be lit at one time on the Attendant
Console. The Attendant can select any incoming call by depressing the associated key.
6. Calls can be answered via the
ANSWER
key for first-in, first-out priority.
7. Attendant Consoles are limited to 12 unique INCOMING CALL IDENTIFICATION indications.
However, more than one incoming trunk group can be programmed for the same INCOMING CALL
IDENTIFICATION.
8. Assignment of INCOMING CALL IDENTIFICATION lamp and key can be assigned trunk route
basis.