NEC NEAX 2000, Руководство по программированию

Страница: 1080 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 298
Revision 1.0
(1/2)
RETURN SCHEDULE - D
term
GENERAL DESCRIPTION
This feature permits any station user, to register his/her RETURN SCHEDULE from his/her phone
when he/she leaves his/her desk or the premises, and have the RETURN SCHEDULE displayed on a call-
ing D
term
with an LCD during his/her absence.
STATION APPLICATION
All station can set a RETURN SCHEDULE: however, only D
term
with an LCD can display the sched-
ule.
OPERATING PROCEDURE
To set RETURN SCHEDULE from any station:
1. Go off-hook and receive Dial Tone.
2. Dial the RETURN SCHEDULE feature access code.
3. Dial the number corresponding to desired message:
Dial Message
0
IN:BACK HH:MM
1
OUT:BACK HH:MM
2
AWAY:BACK MM:DD
3
VACATION MM:DD
4. If 0 or 1 is selected, dial the desired time (in five minute increments on a 24 hour basis, depending
on programming).
5. If 2 or 3 is selected, dial the month and date (eg. for June 8, enter 0608).
6. Restore handset, RETURN SCHEDULE is registered.
To cancel RETURN SCHEDULE from the station that set RETURN SCHEDULE:
1. Go off-hook and receive Dial Tone.
2. Dial RETURN SCHEDULE cancel code.
3. Restore handset, RETURN SCHEDULE is cancelled.
SERVICE CONDITIONS
1. Registration of a RETURN SCHEDULE is possible from any type of station (either Single Line Tele-
phone or D
term
).
2. A D
term
user can register RETURN SCHEDULE, not only on its primary station but also on secondary
station appearances for the associated station user. Calls to the primary station will result in receipt of
the RETURN SCHEDULE message.
3. The CALL FORWARDING feature has priority over the RETURN SCHEDULE feature.
4. When a call is rerouted to another station (by CALL FORWARDING), and if that station has regis-
tered a RETURN SCHEDULE, that RETURN SCHEDULE is displayed to the calling party.