NEC NEAX 2000, Руководство по программированию

Страница: 1004 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 222
Revision 1.0
(1/3)
MESSAGE REMINDER-D
term
GENERAL DESCRIPTION
This feature provides any station, Attendant Console the ability to turn on the Message Waiting (MW)
lamp of a Single Line Telephone or the MESSAGE REMINDER LED of a D
term
.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To set MESSAGE REMINDER from a Single Line Telephone:
1. Lift handset and receive Dial Tone.
2. Dial the MESSAGE REMINDER feature access code.
3. Dial the desired station number and receive Service Set Tone.
4. The MESSAGE REMINDER LED on the dialled D
term
or MW lamp on the dialled Single Line
Telephone lights.
To set MESSAGE REMINDER from a D
term
(without calling the station to be set):
1. Lift handset or depress the Speaker key and receive Dial Tone.
2. Dial the MESSAGE REMINDER feature access code.
3. Dial the desired station number. Service Set Tone is received and the LCD displays “
SET xxxx
”
(where
xxxx
is the dialled station number).
4. The MESSAGE REMINDER LED on the dialled D
term
or MW lamp on the dialled Single Line
Telephone will light to indicate a message has been set.
To set MESSAGE REMINDER from a D
term
(after dialling the station to be set):
1. Lift handset or depress the Speaker key and receive Dial Tone.
2. Dial the desired station number, Ringback Tone or Busy Tone is received.
3. Depress the
MESSAGE REMINDER key, or dial 6, if single digit feature access codes are ena-
bled. Service Set Tone is received and the LCD displays “
SET xxxx
” (where
xxxx
is the dialled
station number).
4. The MESSAGE REMINDER LED on the dialled D
term
or MW lamp will light to indicate a mes-
sage has been set.
To retrieve a message from a Single Line Telephone:
1. Lift the handset and receive Dial Tone.
2. Dial the message retrieval access code.
3. Dial 2, the station which set the message is automatically called.
4. Converse when answered.
To clear the message indication without calling the station that set the message, from a Single Line Tele-
phone or a D
term
:
1. Lift the handset and receive Dial Tone.
2. Dial the message retrieval access code.
3. Dial 3; the message is indication is cleared.
4. Restore handset.
5. If more than one message has been set, repeat the above procedure as required.